Extended Long Runtime UPS Systems

Three Phase UPS 8-600kVA

See our Three Phase UPS extended runtime tables page for examples of UPS and battery extension pack configurations from 8 to 600kVA including 3/1 and 3/3  three phase UPS configurations. The table includes UPS  with larger internal batteries and  battery packs some of which have to be built on-site due to their weight and physical size.

Single Phase UPS 700VA-20kVA

The UPS within this collection run to up to 20kVA and can be installed with battery extension packs using plug-in or hardwired terminal connectors to achieve a longer battery autonomy up to 7 hours or more. Jump to the UPS Manufacturer runtime tables on this page: Riello or Eaton or Huawei

Please contact our Power Projects Team if you want a load/runtime configuration not shown in the tables below or require further assistance.

Line Interactive Extended Runtime UPS

Line interactive UPS typically have an internal battery and a matching battery extension pack which connects to a rear panel battery socket. If more than one battery pack is used these are ‘daisy-chained’ together through interconnecting cables and sockets on the rear of the battery extension packs and the number of battery packs may be limited by the UPS battery charging capability. Please check per model if more than one battery extension pack is required as our technical team can advise and size the UPS and battery Ah (Ampere-Hour) required accordingly.

On-line Long Runtime UPS

On-line UPS within this collection may also incorporate a built-in battery pack or in the ‘ER’ models this space is used to house an internal charger for the extended runtime battery packs. To achieve long runtimes the battery extension packs are daisy-chained together but there may be a limit (on a model-by-model basis) as to the number that can be used.

Long Backup UPS Notes

Uninterruptible power supplies with an inverter rated for continuous running can have additional battery extension packs added to their configuration to increase the amount of battery runtime available when the mains power supply fails.

Care has to be taken to ensure that the battery extension packs for the extended backup UPS can be charged within a reasonable recharge period (typically to 80% capacity within 24hours). This is normally achieved by using the existing UPS charging capability or by installing battery extension packs with their own internal chargers; these will also require their own mains power supply connection.

Riello UPS Systems Extended Battery Backup Configurations

Eaton UPS Systems Extended Battery Backup Configurations

Eaton 5130 Series UPS

For more information see the Eaton 5130 UPS range.

Eaton 9130 Series UPS

For more information see the Eaton 9130 Tower UPS.

Eaton 9130 Series UPS Rackmount

For more information see the Eaton 9130 Rack UPS.

Eaton 5PX Series UPS

For more information see the Eaton 5PX UPS range.

Eaton 9SX/9PX Series UPS

For more information see the Eaton 9SX/9PX UPS range.

Huawei UPS Systems Extended Backup Configurations

Huawei UPS2000A On-line Tower UPS 1-3kVA UPS

For more information see the Huawei UPS2000A UPS.

Huawei UPS2000G On-line Tower/Rack Mount UPS 6-10kVA UPS

For more information see the Huawei UPS2000G UPS.

Contact the Eco Power Projects team to book a FREE site survey for your extended backup UPS application, discuss our trade-in service or Health Check an existing system for a maintenance plan.